Security Camera Installation in Toronto
Wiring and power for CCTV and PoE security camera systems in homes and businesses, done right the first time.
Call (416) 828-6976Serving Toronto
From downtown condos to century homes in the older east and west end neighbourhoods, Toronto properties bring a wide range of electrical challenges: aging knob-and-tube wiring, undersized panels, and condo board requirements for EV charger installations. Our licensed electricians work across the city, providing code-compliant electrical service for homeowners, landlords, and businesses alike.
In older pockets like The Annex, Riverdale, and High Park, the most common calls we get are knob-and-tube and aluminum wiring assessments, panel upgrades ahead of a renovation, and insurance-driven electrical inspections during a home sale or refinance. In denser areas like Yorkville and downtown condo corridors, the work skews toward in-suite troubleshooting, lighting upgrades, and condo board–approved EV charger installations in shared parking garages. In The Beaches and Leslieville, potlight and backyard lighting installs are common alongside general panel and outlet work in century homes.
We regularly work in:The Annex,Leslieville,The Beaches,High Park,Riverdale,Yorkville, and the rest of Toronto.
More about our work in Toronto
Overview
We provide security camera installation for homes and businesses throughout Toronto, including The Annex, Leslieville, The Beaches, High Park, and the rest of Toronto.
A security camera system is only as reliable as the wiring and power behind it. We install and wire security camera systems for homes and businesses, including PoE (Power over Ethernet) IP cameras, traditional CCTV/DVR setups, and NVR recorder installations, running new low-voltage cable where none exists, installing dedicated circuits and PoE switches for camera power, and mounting cameras for solid coverage of entrances, driveways, and blind spots. Electrovoltage works with homeowners, retail and commercial property owners, and general contractors on new camera systems, expansions to existing setups, and rewiring jobs where cameras were originally installed with underrated or exposed cabling.
- PoE & traditional CCTV/DVR wiring
- Dedicated circuits for PoE switches & recorders
- Camera mounting & coverage planning included
Why It Matters
Most security camera problems trace back to power and wiring, not the camera itself: a PoE switch that can’t supply enough wattage for the number of cameras connected, cable runs that weren’t rated for outdoor exposure and degrade within a season, or a DVR/NVR powered from a shared outlet that browns out when the system draws a startup surge. Camera placement also depends on where power and data can actually reach, so planning the electrical and low-voltage wiring alongside camera positions, rather than mounting cameras first and figuring out power after, is what determines whether the finished system actually covers what it’s meant to.
How Security Camera Installation Works
- 1
Site walkthrough & coverage planning
We review your property, identify entrances, driveways, and blind spots to cover, and plan camera positions against realistic cable and power routing.
- 2
Power & PoE planning
We size PoE switches and injectors or dedicated circuits for your camera count, and check panel capacity for the recorder and network equipment.
- 3
Wiring installation
We run new low-voltage or PoE cabling rated for indoor or outdoor use, or work with existing cabling where it’s in good condition.
- 4
Mounting, testing & handover
We mount cameras, connect and test every camera feed against the recorder or app, and confirm stable power before we leave.
What Affects the Cost
Cost depends on the number of cameras and whether cabling is PoE or traditional CCTV, how much new low-voltage wiring needs to be run and how accessible that route is, whether a dedicated circuit is needed for the PoE switch or recorder, and whether the job includes an NVR/DVR setup or integrates with an existing recorder.
Frequently Asked Questions
- Do you install PoE security cameras or only traditional CCTV?
- We install both. For PoE (Power over Ethernet) IP camera systems we size and wire the PoE switch or injectors correctly, and for traditional CCTV/DVR setups we run the coax and power cabling needed for each camera.
- Can you add cameras to a system that already exists?
- Yes, we regularly extend existing camera systems, adding cameras to spare NVR or DVR channels, or upgrading the PoE switch if the existing one doesn’t have capacity for more cameras.
- Do you run new wiring if my property has none?
- Yes, we run new low-voltage or PoE cabling rated for indoor or outdoor use to wherever cameras need to go, including routing through finished walls, attics, or exterior siding.
- Why do my cameras keep dropping offline or losing power?
- This is usually a power issue: a PoE switch undersized for the number of cameras connected, or a DVR/NVR sharing a circuit that can’t supply a stable load. We size the power supply correctly for your camera count.
- Do you install the NVR or DVR recorder as well as the cameras?
- Yes, we install and wire the recorder, connect and test every camera feed, and confirm the system is accessible on your network or app before we finish.
- How much does security camera installation cost?
- Cost depends on your camera count, whether the system is PoE or traditional CCTV, how much new wiring needs to be run, and whether a dedicated circuit is needed. We provide a clear quote after reviewing your property.
Other Services in Toronto
Panel Upgrades in Toronto
Upgrade your electrical panel for improved safety, capacity and reliability.
EV Charger Installation in Toronto
Professional EV charger installation for homes and businesses.
Fire Alarm Installation in Toronto
Protect your property with code-compliant fire alarm systems and monitoring.
Potlights & Lighting in Toronto
Custom lighting design and installation to enhance your space.
Electrical Troubleshooting in Toronto
Fast diagnosis and repair for electrical issues big or small.
Commercial Electrical Services in Toronto
Reliable electrical solutions for offices, retail and industrial properties.
Backyard & Garden Lighting in Toronto
Custom backyard and garden lighting design and installation for outdoor living and landscaping.
Industrial Electrician in Toronto
Fault finding, diagnostics and electrical maintenance for industrial and production facilities.
Knob-and-Tube Wiring Removal in Toronto
Safe removal and replacement of outdated knob-and-tube wiring in older Toronto and GTA homes.
Aluminum Wiring Replacement in Toronto
Aluminum wiring repair and replacement to reduce fire risk and meet insurance requirements.
Generator Installation in Toronto
Standby generator installation and backup power systems for homes and businesses.
Electrical Safety Inspection in Toronto
ESA-compliant electrical safety inspections for home sales, insurance, and peace of mind.
Whole-Home Surge Protection in Toronto
Panel-level surge protection to guard your home’s electronics and appliances.
Basement Electrical Wiring in Toronto
Electrical rough-in and finishing for basement renovations and legal second suites.
Air Conditioner Electrical Installation in Toronto
Dedicated circuits, disconnect switches, and panel capacity for central air and ductless AC systems.
Hot Tub Electrical Installation in Toronto
GFCI-protected dedicated circuits, disconnects, and bonding for hot tubs and spas, installed to Ontario Electrical Code.
Smart Video Doorbell Installation in Toronto
Correct wiring, transformer, and power setup for Ring, Nest, and other video doorbells, done right the first time.
Sump Pump Panel Installation in Toronto
Duplex sump pump control panel installation and wiring for industrial, commercial and multi-residential properties, with alarms and redundant pump control.
High Bay Lighting Installation in Toronto
LED high bay lighting installation and retrofits for warehouses, shops and industrial facilities, wired for even coverage and lower energy costs.
600V Welding Plug Installation in Toronto
600V welding disconnect and pin-and-sleeve plug installation for industrial and commercial shops running heavy-duty welding equipment.
Restaurant Electrician in Toronto
Electrical installation and repair for restaurants and commercial kitchens, from hood suppression interlocks to dedicated equipment circuits.
Warehouse Electrician in Toronto
Electrical installation and repair for warehouses and distribution centres, from dock and racking power to forklift charging stations.
Outlet Installation & Repair in Toronto
New outlet installation, relocations, and repairs for homes and businesses, including GFCI, USB, and dedicated appliance circuits.
Three-Phase Motor Wiring & Repair in Toronto
Three-phase motor circuit installation, motor control wiring, and repair for industrial and commercial equipment.
Solar PV Installation in Toronto
Grid-tied solar PV system design and installation, including panel mounting, inverter wiring, and utility interconnection.
Security Alarm Installation in Toronto
Wiring and installation for burglar alarm systems, including door/window sensors, motion detectors, keypads, and monitoring.
Security Camera Installation in Other Areas
Get Started
Request a Quote Today
Tell us about your project and we'll get back to you with a free, no-obligation quote.
(416) 828-6976