Electrovoltage Electrical Services

Service Areas / Toronto

EV Charger Installation in Toronto

Professional EV charger installation for homes and businesses.

Call (416) 828-6976

Serving Toronto

From downtown condos to century homes in the older east and west end neighbourhoods, Toronto properties bring a wide range of electrical challenges: aging knob-and-tube wiring, undersized panels, and condo board requirements for EV charger installations. Our licensed electricians work across the city, providing code-compliant electrical service for homeowners, landlords, and businesses alike.

In older pockets like The Annex, Riverdale, and High Park, the most common calls we get are knob-and-tube and aluminum wiring assessments, panel upgrades ahead of a renovation, and insurance-driven electrical inspections during a home sale or refinance. In denser areas like Yorkville and downtown condo corridors, the work skews toward in-suite troubleshooting, lighting upgrades, and condo board–approved EV charger installations in shared parking garages. In The Beaches and Leslieville, potlight and backyard lighting installs are common alongside general panel and outlet work in century homes.

We regularly work in:The Annex,Leslieville,The Beaches,High Park,Riverdale,Yorkville, and the rest of Toronto.

EV Charger Installation in Toronto: What to Expect

Toronto’s downtown condo corridor is where the shared-infrastructure side of this job shows up most: we’re regularly working directly with condo boards and property managers on chargers installed in shared parking garages, which means load management planning across multiple units, not just wiring a single spot. In older east and west end houses in The Annex or Riverdale, the constraint is usually the opposite problem, a home still on 100A service with knob-and-tube or aluminum wiring in the mix, where the charger install starts with a load calculation and often surfaces a panel or wiring issue that needs addressing first.

More about our work in Toronto
EV Charger Installation in Toronto

Overview

We provide ev charger installation for homes and businesses throughout Toronto, including The Annex, Leslieville, The Beaches, High Park, and the rest of Toronto.

Charge faster and safer at home or at work. We install Level 2 EV chargers for all major vehicle brands, sizing your circuit and panel correctly so charging is fast, safe and reliable. Whether you need a garage EV charger installed for a Tesla, Ford, or any other electric vehicle, or a bank of chargers for a commercial parking lot or condo building, our licensed electricians in Toronto and across the GTA handle the full process: panel capacity assessment, permitting, installation, and ESA inspection.

  • Level 2 residential & commercial chargers
  • Panel capacity assessment included
  • Compatible with all major EV brands
Call (416) 828-6976 for EV Charger Installation in Toronto

Why It Matters

A standard 120V outlet (Level 1) can take well over 24 hours to fully charge an EV, which is fine for light daily driving but too slow for most households. A dedicated Level 2 EV charger installation runs on a 240V circuit and cuts that to roughly 4–10 hours depending on the vehicle and charger amperage, and it does it on a circuit that’s actually sized and protected for continuous high-draw use, something a repurposed dryer outlet or extension cord is not rated for. The complication in Toronto and the GTA is usually the home itself: many properties still run 100A service, and once you account for HVAC, a range, and everyday loads, there’s often not enough headroom left for a 40–50A charging circuit without a load calculation or a panel upgrade. Condo and townhome owners face a second layer, shared electrical infrastructure and condo board approval, which is why we work directly with property managers and boards on multi-unit installations.

How EV Charger Installation Works

  1. 1

    Panel & load assessment

    We calculate your home’s existing electrical load against the new charging circuit to confirm your panel has the capacity, or tell you plainly if it doesn’t.

  2. 2

    Charger & placement planning

    We help you choose between a Tesla Wall Connector or a universal Level 2 charger and plan the mounting location and wire run for your garage, driveway, or parking spot.

  3. 3

    Permit & installation

    We pull the ESA permit, run the dedicated circuit, and mount and wire the charger to manufacturer and code specifications.

  4. 4

    ESA inspection & walkthrough

    Once inspected and approved, we walk you through the charger’s controls, app pairing (if applicable), and any load-management settings.

What Affects the Cost

Downtown condo installs are priced mainly on property-management coordination and load-management documentation rather than the wiring itself, since the run inside a shared garage is usually short, while Annex and Riverdale quotes can grow if the load calculation flags an aluminum or knob-and-tube section that needs addressing before the charger circuit is signed off.

The biggest cost variable is whether your panel has spare capacity or needs a panel upgrade first; we’ll always tell you which situation you’re in before quoting. After that, cost is driven by the distance and routing between your panel and the charger location, whether the charger hardware is owner-supplied or purchased through us, and, for condos, the complexity of coordinating with shared building infrastructure.

Frequently Asked Questions

How does condo board approval work for an EV charger in a downtown Toronto building?
We provide the load calculations and technical documentation your condo board typically needs to approve the install, and coordinate directly with the property manager on shared electrical infrastructure and any building-wide load management system already in place.
My Riverdale house still has some original wiring, can I still get an EV charger installed?
Usually yes, but we start with a full load assessment since older homes on 100A service with knob-and-tube or aluminum wiring sometimes need panel or wiring work addressed before or alongside the charger circuit.
Will my existing panel support an EV charger?
It depends on your panel’s capacity and existing electrical load. We include a full panel assessment with every EV charger installation, and recommend a panel upgrade if extra capacity is needed.
Do you install EV chargers for condos and apartment buildings?
Yes, we work with property managers and condo boards across the GTA on multi-unit EV charger installations, including shared electrical infrastructure and load management systems.
How much does home EV charger installation cost?
Cost depends on your panel capacity, the distance from your panel to the charger location, and whether a panel upgrade is needed. We provide a fixed quote after assessing your home.
Do you need a permit to install an EV charger?
Yes, EV charger installations require an ESA permit and inspection, which we handle as part of every installation.
Can you install a Tesla Wall Connector as well as universal chargers?
Yes, we install both Tesla Wall Connectors and universal Level 2 chargers compatible with any EV brand, based on your vehicle and preference.

Other Services in Toronto

Panel Upgrades in Toronto

Upgrade your electrical panel for improved safety, capacity and reliability.

Fire Alarm Installation in Toronto

Protect your property with code-compliant fire alarm systems and monitoring.

Potlights & Lighting in Toronto

Custom lighting design and installation to enhance your space.

Electrical Troubleshooting in Toronto

Fast diagnosis and repair for electrical issues big or small.

24/7 Emergency Electrician in Toronto

Round-the-clock emergency electrical response for power outages, sparking outlets, and burning smells.

Commercial Electrical Services in Toronto

Reliable electrical solutions for offices, retail and industrial properties.

Backyard & Garden Lighting in Toronto

Custom backyard and garden lighting design and installation for outdoor living and landscaping.

Industrial Electrician

Fault finding, diagnostics and electrical maintenance for industrial and production facilities.

Knob-and-Tube Wiring Removal in Toronto

Safe removal and replacement of outdated knob-and-tube wiring in older Toronto and GTA homes.

Aluminum Wiring Replacement in Toronto

Aluminum wiring repair and replacement to reduce fire risk and meet insurance requirements.

Generator Installation in Toronto

Standby generator installation and backup power systems for homes and businesses.

Electrical Safety Inspection in Toronto

ESA-compliant electrical safety inspections for home sales, insurance, and peace of mind.

Whole-Home Surge Protection in Toronto

Panel-level surge protection to guard your home’s electronics and appliances.

Basement Electrical Wiring in Toronto

Electrical rough-in and finishing for basement renovations and legal second suites.

Air Conditioner Electrical Installation

Dedicated circuits, disconnect switches, and panel capacity for central air and ductless AC systems.

Hot Tub Electrical Installation

GFCI-protected dedicated circuits, disconnects, and bonding for hot tubs and spas, installed to Ontario Electrical Code.

Smart Video Doorbell Installation

Correct wiring, transformer, and power setup for Ring, Nest, and other video doorbells, done right the first time.

Sump Pump Panel Installation in Toronto

Duplex sump pump control panel installation and wiring for industrial, commercial and multi-residential properties, with alarms and redundant pump control.

High Bay Lighting Installation

LED high bay lighting installation and retrofits for warehouses, shops and industrial facilities, wired for even coverage and lower energy costs.

600V Welding Plug Installation

600V welding disconnect and pin-and-sleeve plug installation for industrial and commercial shops running heavy-duty welding equipment.

Restaurant Electrician in Toronto

Electrical installation and repair for restaurants and commercial kitchens, from hood suppression interlocks to dedicated equipment circuits.

Warehouse Electrician

Electrical installation and repair for warehouses and distribution centres, from dock and racking power to forklift charging stations.

Security Camera Installation

Wiring and power for CCTV and PoE security camera systems in homes and businesses, done right the first time.

Outlet Installation & Repair

New outlet installation, relocations, and repairs for homes and businesses, including GFCI, USB, and dedicated appliance circuits.

Three-Phase Motor Wiring & Repair

Three-phase motor circuit installation, motor control wiring, and repair for industrial and commercial equipment.

Solar PV Installation

Grid-tied solar PV system design and installation, including panel mounting, inverter wiring, and utility interconnection.

Security Alarm Installation

Wiring and installation for burglar alarm systems, including door/window sensors, motion detectors, keypads, and monitoring.

Sound System Installation

Wiring and installation for in-wall, in-ceiling, outdoor and multi-room sound systems, done right the first time.

Exhaust Fan Installation

Bathroom, kitchen, and range hood exhaust fan installation and wiring, vented properly to code.

Get Started

Request a Quote Today

Tell us about your project and we'll get back to you with a free, no-obligation quote.

(416) 828-6976