High Bay Lighting Installation in Toronto
LED high bay lighting installation and retrofits for warehouses, shops and industrial facilities, wired for even coverage and lower energy costs.
Call (416) 828-6976Serving Toronto
From downtown condos to century homes in the older east and west end neighbourhoods, Toronto properties bring a wide range of electrical challenges: aging knob-and-tube wiring, undersized panels, and condo board requirements for EV charger installations. Our licensed electricians work across the city, providing code-compliant electrical service for homeowners, landlords, and businesses alike.
In older pockets like The Annex, Riverdale, and High Park, the most common calls we get are knob-and-tube and aluminum wiring assessments, panel upgrades ahead of a renovation, and insurance-driven electrical inspections during a home sale or refinance. In denser areas like Yorkville and downtown condo corridors, the work skews toward in-suite troubleshooting, lighting upgrades, and condo board–approved EV charger installations in shared parking garages. In The Beaches and Leslieville, potlight and backyard lighting installs are common alongside general panel and outlet work in century homes.
We regularly work in:The Annex,Leslieville,The Beaches,High Park,Riverdale,Yorkville, and the rest of Toronto.
More about our work in Toronto
Overview
We provide high bay lighting installation for homes and businesses throughout Toronto, including The Annex, Leslieville, The Beaches, High Park, and the rest of Toronto.
Warehouses, service bays, and production floors need consistent, high-output lighting mounted 15-40 feet overhead, and getting there safely with a lift, sizing the right fixture for the ceiling height, and running the circuits to support it is a different job than a standard commercial fit-out. We install and retrofit LED high bay fixtures for warehouses, auto and truck service shops, distribution centres, and manufacturing floors, including new circuit runs, occupancy and daylight sensor controls, and full removal of old metal halide or fluorescent high bay fixtures. Electrovoltage installs high bay lighting for industrial and commercial properties across Toronto and the GTA, and it’s a common pairing with our industrial electrician and commercial electrical services.
- LED retrofit for metal halide & fluorescent high bays
- Occupancy & daylight sensor controls
- Lift-access installation for warehouses & shops
Why It Matters
Most older warehouses and shops are still lit with metal halide or T5 fluorescent high bays, fixtures that take minutes to reach full brightness after a power interruption, lose significant output as they age, and draw far more power than an equivalent LED fixture for the same lumen output. That gap adds up fast at industrial scale: a facility running dozens of 400W metal halide fixtures on for a full shift schedule is paying for it every month, and dim, yellowing fixtures near the end of their life are also a safety issue on a shop floor where visibility around machinery and forklifts matters. The other part that’s easy to underestimate is coverage: high bay fixtures mounted 20-30+ feet up need to be spaced and aimed correctly for the ceiling height and layout, or you end up with bright fixtures and dark aisles in between, which is a design problem, not just a fixture-swap problem.
How High Bay Lighting Installation Works
- 1
Site assessment & layout
We measure ceiling height, existing fixture spacing, and layout obstacles like crane rails or racking, and plan fixture count and placement for even coverage.
- 2
Fixture & control selection
We size LED high bay fixtures to your space and specify occupancy or daylight sensor controls where they’ll cut energy use without affecting visibility.
- 3
Removal & installation
We safely remove old metal halide or fluorescent fixtures and install and wire the new LED fixtures and any new circuits from lift or scissor lift access.
- 4
Testing & walkthrough
We test every fixture and control, confirm even coverage across the floor, and walk you through any sensor or dimming settings before we leave.
What Affects the Cost
Cost depends on the number of fixtures and ceiling height (which drives lift access and labour time), whether existing circuits can be reused or new ones need to be run, whether old fixtures need to be removed and disposed of, and whether occupancy or daylight sensor controls are part of the scope.
Frequently Asked Questions
- How much can I save switching from metal halide to LED high bays?
- LED high bay fixtures typically use 40-60% less energy than equivalent metal halide fixtures for the same light output, and last significantly longer, so the savings show up in both your power bill and reduced fixture replacement.
- How high can your high bay fixtures be installed?
- We install high bay fixtures from roughly 15 feet up to 40+ feet, sizing the fixture’s output and beam angle to the specific ceiling height so coverage stays even at floor level.
- Do you remove and dispose of old fixtures?
- Yes, we remove your existing metal halide or fluorescent high bay fixtures and handle disposal, including proper handling of any ballasts or lamps that require it.
- Can high bay lighting be installed around a crane rail or racking?
- Yes, we plan fixture placement around crane rails, ductwork, and racking layouts as part of the site assessment, so coverage stays even despite obstacles.
- Do you install occupancy or daylight sensors with high bay lighting?
- Yes, we install occupancy and daylight sensor controls where they make sense for the space, reducing energy use in areas that aren’t constantly occupied without affecting visibility when they are.
- How much does high bay lighting installation cost?
- Cost depends on fixture count, ceiling height, whether new circuits are needed, and whether old fixtures need removal. We provide a clear quote after assessing your space.
Other Services in Toronto
Panel Upgrades in Toronto
Upgrade your electrical panel for improved safety, capacity and reliability.
EV Charger Installation in Toronto
Professional EV charger installation for homes and businesses.
Fire Alarm Installation in Toronto
Protect your property with code-compliant fire alarm systems and monitoring.
Potlights & Lighting in Toronto
Custom lighting design and installation to enhance your space.
Electrical Troubleshooting in Toronto
Fast diagnosis and repair for electrical issues big or small.
Commercial Electrical Services in Toronto
Reliable electrical solutions for offices, retail and industrial properties.
Backyard & Garden Lighting in Toronto
Custom backyard and garden lighting design and installation for outdoor living and landscaping.
Industrial Electrician in Toronto
Fault finding, diagnostics and electrical maintenance for industrial and production facilities.
Knob-and-Tube Wiring Removal in Toronto
Safe removal and replacement of outdated knob-and-tube wiring in older Toronto and GTA homes.
Aluminum Wiring Replacement in Toronto
Aluminum wiring repair and replacement to reduce fire risk and meet insurance requirements.
Generator Installation in Toronto
Standby generator installation and backup power systems for homes and businesses.
Electrical Safety Inspection in Toronto
ESA-compliant electrical safety inspections for home sales, insurance, and peace of mind.
Whole-Home Surge Protection in Toronto
Panel-level surge protection to guard your home’s electronics and appliances.
Basement Electrical Wiring in Toronto
Electrical rough-in and finishing for basement renovations and legal second suites.
Air Conditioner Electrical Installation in Toronto
Dedicated circuits, disconnect switches, and panel capacity for central air and ductless AC systems.
Hot Tub Electrical Installation in Toronto
GFCI-protected dedicated circuits, disconnects, and bonding for hot tubs and spas, installed to Ontario Electrical Code.
Smart Video Doorbell Installation in Toronto
Correct wiring, transformer, and power setup for Ring, Nest, and other video doorbells, done right the first time.
Sump Pump Panel Installation in Toronto
Duplex sump pump control panel installation and wiring for industrial, commercial and multi-residential properties, with alarms and redundant pump control.
600V Welding Plug Installation in Toronto
600V welding disconnect and pin-and-sleeve plug installation for industrial and commercial shops running heavy-duty welding equipment.
Restaurant Electrician in Toronto
Electrical installation and repair for restaurants and commercial kitchens, from hood suppression interlocks to dedicated equipment circuits.
Warehouse Electrician in Toronto
Electrical installation and repair for warehouses and distribution centres, from dock and racking power to forklift charging stations.
Security Camera Installation in Toronto
Wiring and power for CCTV and PoE security camera systems in homes and businesses, done right the first time.
Outlet Installation & Repair in Toronto
New outlet installation, relocations, and repairs for homes and businesses, including GFCI, USB, and dedicated appliance circuits.
Three-Phase Motor Wiring & Repair in Toronto
Three-phase motor circuit installation, motor control wiring, and repair for industrial and commercial equipment.
Solar PV Installation in Toronto
Grid-tied solar PV system design and installation, including panel mounting, inverter wiring, and utility interconnection.
Security Alarm Installation in Toronto
Wiring and installation for burglar alarm systems, including door/window sensors, motion detectors, keypads, and monitoring.
High Bay Lighting Installation in Other Areas
Get Started
Request a Quote Today
Tell us about your project and we'll get back to you with a free, no-obligation quote.
(416) 828-6976