Fire Alarm Installation in Scarborough

How Fire Alarm Installation Works

1. 1

   Site assessment & code review

   We walk the property, identify occupancy type, and confirm exactly what the Ontario Building Code or Fire Code requires for your specific situation.

2. 2

   System design

   We lay out detector, pull station, and notification device placement, and specify hardwired interconnected alarms or an addressable panel depending on scale.

3. 3

   Installation & wiring

   We install and wire every device, terminate at the panel, and integrate with third-party monitoring if your property requires it.

4. 4

   Testing, documentation & inspection scheduling

   We test every device and the monitoring connection, then provide documentation and set up your ongoing inspection schedule if one is required.

Frequently Asked Questions

If I add a bedroom to my Wexford bungalow’s basement, does it need a smoke alarm?

Yes, interconnected smoke alarms are required outside every sleeping area as well as on every storey, so a new basement bedroom needs one wired into your existing system.

What’s different about fire alarm requirements for a retail plaza near Agincourt versus a house?

Commercial properties fall under the Ontario Fire Code, which requires a monitored system with annual inspection and documentation, sized to the occupancy type and floor area rather than a fixed number of household smoke alarms.

Is fire alarm inspection required by law in Ontario?

Yes, the Ontario Fire Code requires regular inspection and testing of fire alarm systems in most commercial and multi-residential buildings. We offer ongoing inspection programs to keep your property compliant.

Can you integrate fire alarms with monitoring services?

Yes, we install systems that connect to third-party monitoring services for 24/7 alerting, in addition to standalone residential smoke and CO detection.

How often does a commercial fire alarm system need to be inspected?

The Ontario Fire Code requires annual inspection and testing at minimum, with some systems requiring more frequent checks depending on occupancy type. We set up an inspection schedule that matches your property’s requirements.

Do you install both hardwired and wireless smoke detectors?

Yes, we install hardwired interconnected smoke and CO detectors for most homes, and wireless or addressable systems for larger commercial and multi-residential buildings.

What happens during a fire alarm inspection?

We test each detector, pull station, and notification device, verify the control panel and monitoring connection, and provide documentation confirming your system meets Ontario Fire Code requirements.