PLC Programming & Industrial Control Panels in Markham
Industrial automation: we build the control panel, wire the machine and program the PLC and HMI, all under one licensed contractor.
Call (416) 828-6976Licensed Markham Electricians for PLC Programming & Control Panel Services
Markham homeowners increasingly ask us for smart lighting and EV charger installations alongside standard repairs, while local businesses rely on us for ongoing commercial electrical maintenance. Our licensed electricians serve Markham with the same upfront pricing and code-compliant work as everywhere else in the GTA.
In Unionville and Berczy Village, where many homes were built from the 1990s onward, we see more EV charger installations, smart dimmer upgrades, and potlight retrofits than panel replacements. Cornell’s newer new-urbanist homes bring similar requests alongside the occasional builder-grade panel that needs upsizing for a renovation. Around Milliken and Markham’s tech and office corridors, commercial electrical maintenance and lighting retrofits are our most common calls.
Looking for a licensed electrician for plc programming & control panel services near you in Markham? Call us at (416) 828-6976 to schedule a licensed Master Electrician for your neighbourhood.
We regularly work in:Unionville,Milliken,Cornell,Berczy Village, and the rest of Markham.
PLC Programming & Industrial Control Panels in Markham: What to Expect
Markham combines advanced manufacturing, electronics, and technology-driven industrial users in business parks around Highway 404, Steeles and Woodbine. Many of these facilities run precision equipment, test stands and automated assembly cells, where automation work is about reliable data collection, tight sequencing, and integrating machines with plant networks and reporting systems.
More about our work in Markham
PLC Programming & Control Panel Services in Markham
We provide plc programming & control panel services for homes and businesses throughout Markham, including Unionville, Milliken, Cornell, Berczy Village, and the rest of Markham.
Most plants end up with three separate vendors for one machine: an electrician to wire it, a panel shop to build the cabinet, and a programmer to make it run, and when something faults, each one points at the other. Electrovoltage covers the whole chain. We design and build industrial control panels, wire the machine and its field devices, program the PLC and HMI, and commission the finished system on your floor, all under one licensed electrical contractor in Toronto and the GTA. That includes new machine builds, line extensions, retrofits of ageing or obsolete controllers, VFD and servo integration, safety circuits, industrial networking, and fault-finding on automation you already own. Every project ends with a complete handover package: as-built drawings, I/O list, a commented program, and a backup of the final code, so your team is never locked out of its own equipment.
- Custom control panel design & build
- PLC & HMI programming, commissioned on your floor
- Machine wiring, VFD & servo integration
- Retrofits & obsolete controller migration
- Full drawings, I/O list & code backup handed over
Related Electrical Services in Markham
Industrial Electrician
Fault finding, diagnostics and electrical maintenance for industrial and production facilities.
Three-Phase Motor Wiring & Repair
Three-phase motor circuit installation, motor control wiring, and repair for industrial and commercial equipment.
Network Cabling & Installation
Structured network cabling, CAT6/CAT6A data drops, server racks, and patch panel wiring for homes and businesses.
Why Code Compliance Matters for PLC Programming & Control Panel Services in Markham
A control panel is both an electrical assembly and a piece of software, and the two fail in different ways. On the electrical side, a panel built or modified without proper short-circuit current rating, conductor sizing, overcurrent protection and field approval can be refused by the Electrical Safety Authority or an insurer, and it can create a real arc-flash hazard for the next person who opens it. On the software side, unstructured ladder logic, undocumented forced bits and missing backups turn every future change into a risky guess. The fix is to treat both halves as one deliverable: a panel built to Ontario Electrical Safety Code requirements and the relevant CSA industrial control panel standard, with a program written to the IEC 61131-3 model that someone other than the original programmer can read and maintain. Safety functions such as emergency stops, guard interlocks and light curtains need a documented risk assessment and a reliable design (the ISO 13849-1 performance level approach), and in Ontario new or modified machinery may also trigger a pre-start health and safety review under Regulation 851. Add the growing exposure of plant networks, where remote access and flat networks are a common weak point, and it is clear why automation work is more than ‘wire it and make it run’.
Our Automation Project Process in Markham
- 1
Scope, I/O list & functional specification
We walk the machine or line with your team, agree what it must do, and turn that into a written scope: I/O count, power and voltage, safety functions, networks, HMI screens, enclosure environment and approvals. You see a fixed scope before any panel material is ordered.
- 2
Electrical design & panel build
We produce schematics, panel layout and a bill of materials, then build the enclosure with correct component spacing, labelled terminals, segregated power and control wiring, grounding and a rated short-circuit current. Drawings stay with you as editable files, not just PDFs.
- 3
PLC & HMI programming and bench test
We write structured, commented PLC logic and HMI screens (alarms, trends, recipes and manual modes as needed), simulate sequences on the bench and, where practical, run a factory acceptance test with your team before the panel ships to the floor.
- 4
Installation, wiring & commissioning
We set the panel, wire power and field devices, check every input and output point by point, tune drives and sensors, verify the safety circuits, and run the machine through its full cycle, all scheduled around your production windows.
- 5
ESA approval, training & handover
We handle the ESA permit and inspection or field approval where the work requires it, train your operators and maintenance staff, and deliver the as-built drawings, I/O list, commented program and code backup so you own everything we built.
PLC Programming & Control Panel Services Cost Factors in Markham
Data and networking requirements push scope in Markham projects: connecting machines to plant networks, historians or reporting tools adds engineering time beyond the panel and PLC program itself.
Automation pricing is driven by scope, not by square footage. The biggest factors are the number and type of I/O points, how many drives, servos or instruments are integrated, the safety functions required, the HMI size and number of screens, and the network architecture. Enclosure choice (a stainless or NEMA 4X panel for washdown costs more than a painted steel cabinet), required approvals, and whether we build a new panel or retrofit an existing one also matter. Retrofits of undocumented machines take extra time because the existing logic must be traced and documented first. Quotes break out design, panel build, programming, installation and commissioning, so you can see exactly what you are paying for and phase the work if needed.
PLC Programming & Control Panel Services FAQs for Markham
- Can you build control panels for test stands and automated assembly cells in Markham?
- Yes. We design panels and programs for assembly and test equipment, including the sensors, motion and operator screens needed, and document sequences clearly for validation.
- Can machine data be sent to our plant reporting system?
- Yes. We can publish machine status, counts and alarms to SCADA or reporting systems over industrial Ethernet, keeping the control network separated from the office network.
- What is the difference between a PLC, an HMI and a control panel?
- The PLC (programmable logic controller) is the industrial computer that reads sensors and switches outputs according to its program. The HMI (human machine interface) is the touchscreen operators use to start the machine, see alarms and change settings. The control panel is the enclosure that houses the PLC, power supplies, breakers, contactors, drives, terminals and wiring that connect them to the machine.
- Can one company build the panel, wire the machine and program the PLC?
- Yes, and that is how we work. Having one licensed contractor responsible for the panel, the field wiring and the program avoids the finger-pointing that happens when three vendors share one machine, and it shortens commissioning because the person who wired a sensor is the person who tests it in the program.
- Can you take over a machine whose original programmer is gone?
- Often yes. We start by backing up whatever is on the controller, tracing the existing logic and documenting it, then fix or improve it. If the program is locked or lost, we discuss options with you before quoting, which can include rebuilding the logic from the machine’s sequence of operation.
- Do you replace obsolete PLCs and migrate the old program?
- Yes. Controller migrations replace discontinued hardware while keeping the machine’s behaviour, ideally during a planned shutdown. We map every I/O point, convert or rewrite the logic, test it on the bench, and cut over with a rollback plan so production is not left stranded.
- Which PLC brands do you work with?
- Tell us which controller and software your machine already uses and we will confirm up front whether we can support it before we quote. For new builds we help you choose a platform your maintenance team and local suppliers can support long term, rather than whichever brand is convenient for us.
- Does a custom control panel need ESA approval in Ontario?
- Electrical equipment used in Ontario must be approved, normally through a recognized certification mark. A one-off machine panel often has no certification mark, in which case it needs a field evaluation or special inspection arranged through the Electrical Safety Authority or an accredited body. We tell you at quote stage which route applies and handle the permit and inspection.
- What documentation will I receive at the end of a project?
- You receive as-built electrical drawings (editable files and PDF), the I/O list, a panel layout and bill of materials, the commented PLC and HMI programs, a backup of the final code and settings, and the ESA documentation where applicable. You own it all, and any competent integrator can pick it up later.
- Can you add safety circuits such as E-stops, light curtains and guard interlocks?
- Yes. Safety functions are designed from a risk assessment, using safety relays or a safety PLC with performance levels chosen to suit the hazard, and validated before the machine is released. In Ontario, new or modified machinery can also trigger a pre-start health and safety review, which we can support with the technical documentation.
- Can you troubleshoot a machine that keeps faulting or stopping?
- Yes. We connect to the controller, read the diagnostic buffer and I/O states, then trace the fault through sensors, wiring, drives and logic instead of swapping parts. Intermittent faults are common in automation, and logging data over a few shifts often finds what a quick visit cannot.
- Can you connect my machine to the plant network, SCADA or MES?
- Yes. We configure industrial Ethernet links such as EtherNet/IP, PROFINET and Modbus TCP, bring machine data into SCADA or reporting systems, and keep the control network segmented from the office network. Secure remote access is set up only if you want it, with named accounts and an agreed support process.
- How long does a control panel project take?
- A small single-machine panel can take a few weeks from approved scope to commissioning, while a multi-section line or full retrofit takes longer. The main variables are component lead times, how fast drawings and the functional spec are approved, and the production window available for installation. We give a written schedule with the quote.
- Do you offer ongoing support after commissioning?
- Yes. We can provide on-call troubleshooting, program changes, and periodic reviews of panels and backups. After-hours response for production-critical equipment can be arranged in advance, so you are not looking for a vendor in the middle of a shutdown.
Recommended Electrical Guides
More Electrical Services in Markham
Panel Upgrades in Markham
Upgrade your electrical panel for improved safety, capacity and reliability.
EV Charger Installation in Markham
Professional EV charger installation for homes and businesses.
Commercial Electrician in Markham
Reliable electrical solutions for offices, retail and industrial properties.
Smoke & CO Alarm Installation in Markham
Protect your property with code-compliant fire alarm systems and monitoring.
Potlights & Lighting in Markham
Custom lighting design and installation to enhance your space.
Electrical Troubleshooting in Markham
Fast diagnosis and repair for electrical issues big or small.
24/7 Emergency Electrician in Markham
Round-the-clock emergency electrical response for power outages, sparking outlets, and burning smells.
Backyard & Garden Lighting in Markham
Custom backyard and garden lighting design and installation for outdoor living and landscaping.
Industrial Electrician in Markham
Fault finding, diagnostics and electrical maintenance for industrial and production facilities.
Aluminum Wiring Replacement in Markham
Aluminum wiring repair and replacement to reduce fire risk and meet insurance requirements.
Generator Installation in Markham
Standby generator installation and backup power systems for homes and businesses.
Electrical Safety Inspection in Markham
ESA-compliant electrical safety inspections for home sales, insurance, and peace of mind.
Whole-Home Surge Protection in Markham
Panel-level surge protection to guard your home’s electronics and appliances.
Basement Electrical Wiring in Markham
Electrical rough-in and finishing for basement renovations and legal second suites.
Air Conditioner Electrical Installation in Markham
Dedicated circuits, disconnect switches, and panel capacity for central air and ductless AC systems.
Hot Tub Electrical Installation in Markham
GFCI-protected dedicated circuits, disconnects, and bonding for hot tubs and spas, installed to Ontario Electrical Code.
Smart Video Doorbell Installation in Markham
Correct wiring, transformer, and power setup for Ring, Nest, and other video doorbells, done right the first time.
Sump Pump Panel Installation in Markham
Duplex sump pump control panel installation and wiring for industrial, commercial and multi-residential properties, with alarms and redundant pump control.
High Bay Lighting Installation
LED high bay lighting installation and retrofits for warehouses, shops and industrial facilities, wired for even coverage and lower energy costs.
600V Welding Plug Installation
600V welding disconnect and pin-and-sleeve plug installation for industrial and commercial shops running heavy-duty welding equipment.
Restaurant Electrician in Markham
Electrical installation and repair for restaurants and commercial kitchens, from hood suppression interlocks to dedicated equipment circuits.
Warehouse Electrician
Electrical installation and repair for warehouses and distribution centres, from dock and racking power to forklift charging stations.
Security Camera Installation in Markham
Wiring and power for CCTV and PoE security camera systems in homes and businesses, done right the first time.
Outlet Installation & Repair in Markham
New outlet installation, relocations, and repairs for homes and businesses, including GFCI, USB, and dedicated appliance circuits.
Three-Phase Motor Wiring & Repair
Three-phase motor circuit installation, motor control wiring, and repair for industrial and commercial equipment.
Solar PV Installation in Markham
Grid-tied solar PV system design and installation, including panel mounting, inverter wiring, and utility interconnection.
Security Alarm Installation in Markham
Wiring and installation for burglar alarm systems, including door/window sensors, motion detectors, keypads, and monitoring.
Sound System Installation in Markham
Wiring and installation for in-wall, in-ceiling, outdoor and multi-room sound systems, done right the first time.
Exhaust Fan Installation in Markham
Bathroom, kitchen, and range hood exhaust fan installation and wiring, vented properly to code.
Condo Electrician in Markham
In-suite electrical work and condo board–coordinated upgrades for condo owners, landlords and property managers.
Network Cabling & Installation in Markham
Structured network cabling, CAT6/CAT6A data drops, server racks, and patch panel wiring for homes and businesses.
Condominium & Building Electrical Maintenance in Markham
Your Building. Our Electricians. Reliable Electrical Support. Flexible service agreements tailored to condominium corporations, commercial buildings, and property managers.
Baseboard Heater Installation in Markham
Install or replace electric baseboard heaters with dedicated 240V circuits, precision wiring and smart thermostats.
Fan-Forced Wall Heater Installation
Fast, space-saving electric wall heater and fan-forced heater installation with dedicated 240V wiring.
PLC Programming & Control Panel Services in Other Areas
Get Started
Request a Quote Today
Tell us about your project and we'll get back to you with a quote.

