Panel Upgrades in Markham
Upgrade your electrical panel for improved safety, capacity and reliability.
Call (416) 828-6976Serving Markham
Markham homeowners increasingly ask us for smart lighting and EV charger installations alongside standard repairs, while local businesses rely on us for ongoing commercial electrical maintenance. Our licensed electricians serve Markham with the same upfront pricing and code-compliant work as everywhere else in the GTA.
In Unionville and Berczy Village, where many homes were built from the 1990s onward, we see more EV charger installations, smart dimmer upgrades, and potlight retrofits than panel replacements. Cornell’s newer new-urbanist homes bring similar requests alongside the occasional builder-grade panel that needs upsizing for a renovation. Around Milliken and Markham’s tech and office corridors, commercial electrical maintenance and lighting retrofits are our most common calls.
We regularly work in:Unionville,Milliken,Cornell,Berczy Village, and the rest of Markham.
Panel Upgrades in Markham: What to Expect
In Unionville and Berczy Village, where most homes were built from the 1990s onward, full panel replacements are less common than in older parts of the GTA, the more frequent job is confirming existing capacity before an EV charger, smart dimmer, or potlight retrofit, since these newer panels are usually adequate but not unlimited. Cornell’s newer new-urbanist homes occasionally still need an upsized panel when a builder-grade unit gets stretched by a larger renovation. Around Milliken and Markham’s tech and office corridors, panel and distribution work is tied to commercial lighting retrofits and equipment loads rather than residential upgrades.
More about our work in Markham
Overview
We provide panel upgrades for homes and businesses throughout Markham, including Unionville, Milliken, Cornell, Berczy Village, and the rest of Markham.
Older electrical panels can’t keep up with modern power demands and may pose a serious safety risk. Our licensed electricians assess your existing panel and install a properly sized, code-compliant replacement so your home or business has the capacity and protection it needs. Electrovoltage performs 100A and 200A panel upgrades, Federal Pacific and Zinsco panel replacements, and full service upgrades for homes and commercial properties throughout Toronto and the GTA. Every job is permitted and inspected by the Electrical Safety Authority (ESA) so you have documented proof of safe, code-compliant work.
- Full panel replacements and capacity upgrades
- Federal Pacific and Zinsco panel removal
- ESA-compliant installations
Why It Matters
A panel upgrade Toronto homeowners ask for is rarely about vanity. It’s almost always triggered by one of a handful of warning signs: breakers that trip under normal load, warm or discoloured breaker switches, flickering lights when appliances start up, or a panel that’s simply out of open slots for a renovation. Homes built with 60A or 100A fuse boxes or panels, and anything carrying a Federal Pacific Electric (FPE) or Zinsco label, are the most common candidates: both brands have a well-documented history of breakers that fail to trip during a fault, which is a genuine fire risk rather than a theoretical one. Beyond safety, capacity is increasingly the driver: EV charging, electric heat pumps, hot tubs, and finished basements all add continuous load that a 100-amp service was never sized for, and most insurers and home inspectors now flag FPE/Zinsco panels directly during a sale or refinance.
How Panel Upgrades Works
- 1
Free load assessment
We inspect your existing panel, service entrance, and typical electrical load, then confirm whether 100A or 200A service fits your home and any planned additions like EV charging.
- 2
Permit & utility coordination
We pull the ESA permit and, where a service upgrade is involved, coordinate the temporary disconnect and reconnect with your local utility so the timeline is predictable.
- 3
Installation day
We replace the panel, breakers, and (if needed) the meter base and mast, keeping the power outage window as short as possible and cleaning up before we leave.
- 4
ESA inspection & documentation
An ESA inspector signs off on the completed work and we hand you the certificate of inspection for your records, insurance, or future home sale.
What Affects the Cost
Unionville and Berczy Village visits are usually priced as a capacity assessment rather than a replacement since the panels are newer, Cornell upsizes only add cost when a renovation genuinely exceeds the builder-grade panel, and Milliken corridor quotes scale with fixture count and equipment load, not panel size alone.
Panel upgrade pricing depends on more than the panel itself: whether your service entrance and mast are original or need replacing, whether the utility needs to coordinate a meter or transformer change, how accessible the existing panel location is, and whether you’re jumping from 100A to 200A versus a smaller capacity bump. Permit fees and any utility coordination charges are included in your itemized quote, not added as a surprise afterward.
Frequently Asked Questions
- If my Unionville home was built in the 1990s, do I still need a panel assessment before adding an EV charger?
- Yes. Even newer panels can run out of spare capacity once you account for existing appliances and HVAC, so we always calculate your actual load rather than assuming a newer panel automatically has room.
- Do builder-grade panels in Cornell ever need upgrading?
- Occasionally, usually when a larger renovation adds enough new circuits to exceed what the original builder-grade panel was sized for. We assess your specific panel rather than assuming it needs replacing.
- How do I know if my electrical panel needs an upgrade?
- Frequent breaker trips, flickering lights, a burning smell near the panel, or an older Federal Pacific or Zinsco panel are all signs it may be time for an upgrade. Read our guide on 5 signs your panel needs an upgrade, or call us for a free assessment.
- How long does a panel upgrade take?
- Most residential panel upgrades are completed in a single day, including the ESA inspection process. Commercial upgrades vary depending on building size and scheduling requirements.
- Do I need a permit for a panel upgrade?
- Yes. Every panel upgrade requires an ESA permit and inspection, which we pull and schedule on your behalf as part of the job.
- What size panel do I need, 100A or 200A?
- Most homes with electric heating, EV charging, or major renovations need 200A service, while smaller homes without heavy loads may be fine with 100A. We size your new panel based on your home’s actual electrical load, not guesswork.
- How much does a panel upgrade cost?
- Cost depends on your panel size, service entrance condition, and whether utility coordination is needed. We provide a clear, itemized quote after a free on-site assessment.
Other Services in Markham
EV Charger Installation in Markham
Professional EV charger installation for homes and businesses.
Fire Alarm Installation in Markham
Protect your property with code-compliant fire alarm systems and monitoring.
Potlights & Lighting in Markham
Custom lighting design and installation to enhance your space.
Electrical Troubleshooting in Markham
Fast diagnosis and repair for electrical issues big or small.
24/7 Emergency Electrician in Markham
Round-the-clock emergency electrical response for power outages, sparking outlets, and burning smells.
Commercial Electrical Services in Markham
Reliable electrical solutions for offices, retail and industrial properties.
Backyard & Garden Lighting in Markham
Custom backyard and garden lighting design and installation for outdoor living and landscaping.
Industrial Electrician
Fault finding, diagnostics and electrical maintenance for industrial and production facilities.
Knob-and-Tube Wiring Removal in Markham
Safe removal and replacement of outdated knob-and-tube wiring in older Toronto and GTA homes.
Aluminum Wiring Replacement in Markham
Aluminum wiring repair and replacement to reduce fire risk and meet insurance requirements.
Generator Installation in Markham
Standby generator installation and backup power systems for homes and businesses.
Electrical Safety Inspection in Markham
ESA-compliant electrical safety inspections for home sales, insurance, and peace of mind.
Whole-Home Surge Protection in Markham
Panel-level surge protection to guard your home’s electronics and appliances.
Basement Electrical Wiring in Markham
Electrical rough-in and finishing for basement renovations and legal second suites.
Air Conditioner Electrical Installation
Dedicated circuits, disconnect switches, and panel capacity for central air and ductless AC systems.
Hot Tub Electrical Installation
GFCI-protected dedicated circuits, disconnects, and bonding for hot tubs and spas, installed to Ontario Electrical Code.
Smart Video Doorbell Installation
Correct wiring, transformer, and power setup for Ring, Nest, and other video doorbells, done right the first time.
Sump Pump Panel Installation in Markham
Duplex sump pump control panel installation and wiring for industrial, commercial and multi-residential properties, with alarms and redundant pump control.
High Bay Lighting Installation
LED high bay lighting installation and retrofits for warehouses, shops and industrial facilities, wired for even coverage and lower energy costs.
600V Welding Plug Installation
600V welding disconnect and pin-and-sleeve plug installation for industrial and commercial shops running heavy-duty welding equipment.
Restaurant Electrician in Markham
Electrical installation and repair for restaurants and commercial kitchens, from hood suppression interlocks to dedicated equipment circuits.
Warehouse Electrician
Electrical installation and repair for warehouses and distribution centres, from dock and racking power to forklift charging stations.
Security Camera Installation
Wiring and power for CCTV and PoE security camera systems in homes and businesses, done right the first time.
Outlet Installation & Repair
New outlet installation, relocations, and repairs for homes and businesses, including GFCI, USB, and dedicated appliance circuits.
Three-Phase Motor Wiring & Repair
Three-phase motor circuit installation, motor control wiring, and repair for industrial and commercial equipment.
Solar PV Installation
Grid-tied solar PV system design and installation, including panel mounting, inverter wiring, and utility interconnection.
Security Alarm Installation
Wiring and installation for burglar alarm systems, including door/window sensors, motion detectors, keypads, and monitoring.
Sound System Installation
Wiring and installation for in-wall, in-ceiling, outdoor and multi-room sound systems, done right the first time.
Exhaust Fan Installation
Bathroom, kitchen, and range hood exhaust fan installation and wiring, vented properly to code.
Panel Upgrades in Other Areas
Get Started
Request a Quote Today
Tell us about your project and we'll get back to you with a free, no-obligation quote.
(416) 828-6976