Knob-and-Tube Wiring Removal in Oakville

How Knob-and-Tube Wiring Removal Works

1. 1

   Wiring assessment

   We trace your home’s circuits to identify exactly which areas are still on knob-and-tube versus already updated, and check panel capacity for the new wiring.

2. 2

   Rewire plan & permit

   We scope a partial or full rewire based on what we find, and pull the ESA permit before any work begins.

3. 3

   Removal & rewiring

   We remove the old wiring and run new copper circuits, working through existing wall and ceiling cavities to keep drywall disruption to a minimum.

4. 4

   ESA inspection & documentation

   Once inspected and approved, you get a certificate of inspection for your insurer or for your records.

Frequently Asked Questions

Will my insurer in Oakville require knob-and-tube removal?

Many insurers will not cover homes with active knob-and-tube or will charge more. We can assess your home and give you documentation of the work for your insurer.

Do I need to remove all the knob-and-tube in my Old Oakville home at once?

Not necessarily. We can phase the work room by room or floor by floor, though a complete rewire is often more cost-effective if walls are being opened anyway.

How do I know if my home still has knob-and-tube wiring?

Knob-and-tube is visible in unfinished attics and basements as ceramic knobs and tubes with cloth-insulated wiring. Many homes have a mix of knob-and-tube and updated wiring, so a proper inspection is the only way to know for certain.

Does my home insurance require knob-and-tube removal?

Many insurers in Ontario will not write or renew a policy on a home with active knob-and-tube wiring, or will require it to be inspected and certified. We provide documentation your insurer can use either way.

Do you need to open every wall to remove knob-and-tube wiring?

Not always. We route new wiring through existing wall and ceiling cavities wherever possible, and will tell you upfront if a section genuinely requires opening drywall.

Can knob-and-tube wiring be replaced in stages?

Yes, a partial rewire is common, especially if only certain circuits or areas of the home are still on knob-and-tube. We can also plan a phased full rewire if that fits your budget better.

How long does a knob-and-tube rewire take?

A single-circuit or partial rewire can often be done in a day or two, while a full-home rewire typically takes several days depending on the size and layout of the house.

How much does knob-and-tube wiring removal cost?

Cost depends on how much of the home needs rewiring and how accessible the walls and ceilings are. We provide a clear quote after assessing your home’s actual wiring.