Network Cabling & Installation in Newmarket

How Network Cabling & Installation Works

1. 1

   Site Survey & Drop Mapping

   We assess your building layout, ceiling structure (drop ceiling, open deck, or conduit runs), network closet location, and bandwidth demands to plan optimal cable pathways, drop locations, and PoE switch budgets.

2. 2

   Structured Pathway & Cable Pulling

   We pull high-grade, plenum-rated (CMP) or riser (CMR) CAT6, CAT6A, and fiber optic cables through dedicated J-hooks, cable trays, or EMT conduit, strictly maintaining proper bend radiuses and isolation from high-voltage power lines.

3. 3

   Rack Assembly & Patch Panel Termination

   In the server room or telecom closet, cables are dressed neatly with velcro ties, punched down into high-density patch panels, grounded, and organized into wall-mount or free-standing server racks alongside network switches.

4. 4

   Fluke Testing, Labeling & Certification

   Every single RJ45 wall jack, patch panel port, and fiber strand is permanently labeled with matching schematics and certified using professional network cable analyzers for wiremap, attenuation, near-end crosstalk (NEXT), and return loss.

Frequently Asked Questions

Can you install private staff and guest Wi-Fi access points in Newmarket offices?

Yes. We install enterprise dual-band and tri-band access points wired with CAT6A PoE lines, configured for VLAN segregation between secure internal systems and guest traffic.

Do you install wall-mounted network racks for small Newmarket businesses?

Yes. For businesses with limited space, we install locking wall-mount 6U to 12U network cabinets that keep switches, patch panels, and routers secure and off the floor.

What is the difference between CAT6 and CAT6A ethernet cabling?

CAT6 supports speeds up to 10 Gbps over shorter distances (up to 37–55 metres / 121–180 feet) and 1 Gbps up to 100 metres. CAT6A features thicker copper conductors and tighter twists with enhanced shielding (STP/FTP), delivering full 10 Gbps throughput across the entire 100-metre (328-foot) channel while virtually eliminating alien crosstalk. For commercial offices, server backbones, and PoE Wi-Fi 6E/7 access points, CAT6A is the gold standard.

Do commercial office buildings in Ontario require plenum-rated (CMP) cable?

Yes. If cabling runs through drop-ceiling spaces or raised floors used for HVAC air return (plenum spaces), building and fire codes require CMP (Communications Plenum) rated cabling. Plenum cable jackets are made from low-smoke, flame-retardant materials that do not emit toxic fumes during a fire. Non-plenum (CMR/riser) cable is only permitted inside enclosed riser shafts and dedicated conduit.

Why should a licensed electrician install our structured network cabling?

Licensed electricians understand Ontario Electrical Safety Code (OESC) separation rules between low-voltage communications cabling and high-voltage line power (120V/208V/600V). Running data cables across power lines or sharing conduits violates code and creates electromagnetic interference that ruins network performance. Furthermore, our teams safely install dedicated circuits for server racks, UPS battery backups, and commercial cooling units.

What is PoE cabling and what equipment can it power?

Power over Ethernet (PoE, PoE+, and PoE++ / 802.3bt) delivers DC electrical power and high-speed data over a single ethernet cable. We regularly wire PoE drops for ceiling-mounted Wi-Fi access points, IP security cameras, VoIP desk phones, intercoms, and biometric door access controllers, eliminating the need for separate electrical outlets at each device location.

Do you terminate and test fiber optic cables?

Yes. We install, terminate, and test both multimode (OM3/OM4) fiber for high-speed inter-rack and riser backbone connections within a facility, and single-mode (OS2) fiber for long-distance runs between buildings and campus networks.